Our Common Products
Raw Materials
- Iron Ore
Iron Ore
Total Moisture 8% Maximum at 105 degrees Centigrade
Characteristic
Typical
Tolerance
Fe 63.5% Below 62% Rejection or Negotiation SiO2 5% 5% Rejection >5.0% Al2O3 0.55% 0.58% Rejection >2.0% Sulfur 0.003% 0.008% Rejection >0.1% Phosphorus 0.055% 0.06% Rejection >0.1% K2O 0.04% 0.06% Rejection >0.7% MgO 0.19% 0.25% Rejection >1.0% TiO2 0.02% 0.05% Rejection >0.15% - Copper Ore
- Iron Sand
Iron Sand
Iron sand for steel production.
Total Iron (TFe) 54% GB6730. 5-86 Titanium Dioxide (TiO2) 9.12% GB6730. 22-86 - Nickel Ore
Nickel Ore
Components
Levels
Ni Min 1.02% Fe Min 30% Moisture Max 15% - Copper Cathodes
- Caustic Soda
Caustic Soda
ALT-A
Specification for Membrane Grade S/N Characteristic
- Sodium Carbonate (as Na2CO3) Max. 0.40 % by Mass
- Conc. Of sodium Hydroxide (as NaOH) Min. 48 % by Mass
- Chlorides (as NaCl) Max. 0.1 % by Mass
- Sulphates (as Na2SO4) Max. 0.10 % by Mass
- Silicates (as SiO2) Max. 0.02 % by Mass
- Iron (as Fe) Max. 20.0 PPM
- Copper (as Cu) Max. 2.0 PPM
- Manganese (as Mn) Max. 1.0 PPM
ALT-B
Specification for Diaphragm Grade S/N Characteristic
- Sodium Carbonate (as Na2CO3) Max. 0.40 % by Mass
- Conc. Of sodium Hydroxide (as NaOH) Min. 48 % by Mass
- Chlorides (as NaCl) Max. 1.05 % by Mass
- Sulphates (as Na2SO4) Max. 0.10 % by Mass
- Silicates (as SiO2) Max. 0.02 % by Mass
- Iron (as Fe) Max. 20.0 PPM
- Copper (as Cu) Max. 2.0 PPM
- Manganese (as Mn) Max. 1.0 PPM
Normally preference is for membrane grade
- Steam Coal
Steam Coal
3500 Kcal/kg up to 8000 Kcal/Kg
Moisture 15% max VM 32 max Sulfur 1% max Ash 20% max Kcal 5000-5300 Packing BULK - Coking Coal
Coking Coal
Hard Coking Coal
Parameter
Typical
Rejection
Gross Calorific Value (DB) 6.000 kcal/kg <5,750 Kcal/kg Total Moisture(ARB) 12% max none Volatile mater(DB) dry 20 — 22% Sulfur (DB) Dry 0.6% max Ash (DB) dry 9.5% max HGI 70 Size 0 — 50mm none W 10% P dry 0.05% max - Green Petroleum Coke
Green Petroleum Coke
S Africa Component Green coke as produced Coke calcined at 2375 °F (1302 °C)
Fixed carbon, wt % 80 — 95 98.0 — 99.5 Hydrogen, wt % 3.0 — 4.5 0.1 Nitrogen, wt % 0.1 — 0.5 Sulfur, wt % 0.2 — 6.0 Volatile matter, wt % 5 — 15 0.2 — 0.8 Moisture, wt % 0.5 — 10 0.1 Ash, wt % 0.1 — 1.0 0.02 — 0.7 Density, g/cm3 1.2 — 1.6 1.9 — 2.1 - Petroleum Coke
Petroleum Coke
S Africa Fuel Grade Raw Petrol Coke
Sulfur 2.5 — 3.0 Ash 1% max Hydrogen 4 — 5 Nitrogen 1.89 Fix Carbon 86 — 89% Volatile Matter 9.0 — 14% HGI 40 — 70 Moisture 8.0% max ADB 8100 Kcal CV 14.000 Btu/lb CV (net) 7800 Kcal/kg Nickel 200 ppm Vanadium 200 ppm Bullk Density 900 — 1000 Kg/m - Yellow Corn Germ
Yellow Corn Germ
Yellow Maize/Corn Germ for corn oil extraction (Non‐GMO)
Total Moisture 6.5% max Fat 45% max Oil Content 48% min Germ 93% Free Fatty Acid 5% max Husks 7% FFA 3% max Starch 11-12% max - Bauxite
Bauxite
Origin: INDIALOI 27.45% IS 12107(part-1)-1987 SiO2 6.50% Al2O3 47.10% IS 12107(part-3)-1987 Fe2O3 9.42% IS 12107(part-6)-1987 TiO2 3.43% IS 12107(part-5)-1987 CaO 2.42% IS 12107(part-8)-1987 Moisture 9.01%
Building Materials
- Cement
Cement
Ordinary Grey Portland Cement 42.5
Main Raw Material: Silicate
Application: Industry Construction
Low Heat
Rapid Hardening
Feature: Radiation Resistant, Sulfate Resistant
Quality of Cement as per TCVN 6260-2009
European Standards (EN)
Certificate: EN 197-1.2011 CEM II 42.5 N.
Technical Specifications:
- Clinker ranging 80-94%
- BF Slag ranging 6-20%
- Produced according to EN 197/1-2011
Origin: TURKEY and others (seller option). - Clinker
Clinker
Characteristic with ASTM C150 Result Test Method
Packing: BULKSi02 22.5 Max 21.86 AlzQ 6.0 Max 5.31 FezQ 4.5 Max 3.43 CaO 65.0 Min 66.34 Mto 4.00 Max 0.72 ASTM C114-09 Sor 1.0 Max 0.30 Loss on ignition (LOI) 1.5 Max 0.75 Free lime (F.CaO) 1.5 Max 1.0 Insoluble Residue 0.75 Max 0.42 Total alkalies (Na2O+0.658K2O) 0.6 Max 0.53 C3S 55.0 Min 63.18 ASTM Czs 21.5 Max 15.18 CALCULATED C3A 12.0 Max 8.28 C4AF 13.0 Max 10.44 Lime Saturation Factor (LSF) 92 Min 95.15 Moisture 1.0 Max 0.01 Refer ASTM C136 Particle Size1mm 10.0 Max 7.82 Above 30mm 10.0 Max 6.50 Sieve
Fertilizers
- Urea (46%)
Prilled Urea 46%N
Prilled, free flowing, treated against caking, 100% free from harmful substances.
Nitrogen 46% min. Moisture 0.3% max. (BY METHOD OF DRYING) Biuret 1% max. Granulation 1 - 4 mm 90-94 % min. Melting Point 132 Degrees Celsius Colour Pure White Prilled Radiation CERTIFIED Non-Radioactive Free Ammonia 160pxt ppm max. Molecular Weight 60.065 Physical State Solid @ 20C 101 KPS, White Granular Specific Gravity Solid @ 20 Degrees Centigrade - DAP (18-46-0)
DAP
Diammonium Phosphate 18-46-0
Typical Chemical Analysis
Total Nitrogen Content 17.5 – 18.0% Phosphate as P2O5 Total and available wt. 45.5 – 46.2% Water Soluble wt. 40.0 - 42.0% Crude moisture as H2O wt. <1.5% Typical Physical Properties
Bulk density (Loose) 58 lb/ft3 or 897 kg/m3 Bulk density (Packed) 60 lb/ft3 or 961 kg/m3 Angle of repose 31-33 Degrees Size Guide Number (SGN) 260 – 300 Uniformity Index (UI) >50 Screen Size 1 x 4mm >90% - MAP (11-52-0)
MAP
Monoammonium Phosphate 11-52-0
Chemical Analysis
Component/Equivalent
Units
Minimum
Typical
Total Nitrogen wt. % N 11.0 11.2 Ammonium Form wt. % N 11.0 Available Phosphate wt. % P2O5 52.0 52.5 Water Soluble wt. % P2O5 - 48.8 Citrate Soluble wt. % P2O5 - 3.7 Sulfate Sulfur wt. % S - 1.2 Moisture wt. % H2O - 1.8 pH of Aqueous Solution 10% wt./wt. - 4.8 Physical Analysis
Parameter
Units
Range
Typical
Color - - Light Green Angle of repose degrees - 30 Bulk density (Loose) lb/ft3 - kg/m3 - 60-958 Bulk density (Tapped) lb/ft3 - kg/m3 - 63-1010 Size Guide Number (SGN) - - 260 Particle Size Distribution
Tyler Mesh
US Mesh
mm Mesh
Typical wt. %
Retained on... 6 6.3 3.5 8.5 8 8 2.36 69.7 10 12 1.70 95.3 14 16 1.18 99.4 16 18 1.00 99.9 20 20 0.85 100.0 - MOP (0-0-60)
MOP
Muriate of Potash 0-0-60 (Standard Grade)
Chemical Analysis
Component/Equivalent
Units
Minimum
Typical
Potassium Chloride wt. % KCl - 95.65 Potassium Oxide wt. % as K2O 60.00 61.20 Potassium wt. % K - 50.16 Sodium Chloride wt. % NaCl - 3.59 Moisture wt. % H2O - 0.07 Calcium wt. % Ca - 0.04 Chloride wt. % Cl - 47.70 Magnesium wt. % Mg - 0.03 Sodium wt. % Na - 1.41 Sulfate wt. % SO4 - 0.07 Water Insolubles wt. % - 0.43 Physical Analysis
Parameter
Units
Range
Typical
Angle of repose degrees 29-32 31 Bulk density lb/ft3 65-82 - kg/m3 1041-1315 - Size Guide Number (SGN) 95-120 105 Uniformity Index 13-32 24 Particle Size Distribution
Tyler Mesh
US Mesh
mm Mesh
Range wt. %
Typical wt. %
Retained on... 10 12 1.700 0-35 7.37 14 16 1.180 15-65 37.47 20 20 0.850 30-85 68.91 28 30 0.600 51-94 88.02 35 40 0.425 65-98 94.31 48 50 0.300 81-100 99.01 65 70 0.212 91-100 99.73 Passing through... 65 70 0.212 0-9 0.27 - MOP (Standard Pink)
MOP
Muriate of Potash (Standard Pink)
Chemical Analysis
Component
Symbol
Typical %
Guarantee %
Potassium Oxide Equivalent K2O 60.3 60.0 min Potassium Chloride Kcl 95.4 95.0 min Moisture H2O 0.1 - 0.2 0.5 max Potassium K+ 50.12 Sodium Na+ 1.03-1.3 Magnesium Mg2+ 1.01 - 0.02 Calcium Ca2+ 0.07 Sulfate SO4 0.1 Water Insolubles 0.7 - 0.9 Physical Properties
Unit
Range
Bulk density Ton/m3 1.02 - 1.15 Angle of repose Degrees 30 - 38 Particle Size Distribution
mm
Guarantee %
Typical %
-2 (<2) 90 +1 (1-2) 3.0 - 5.0 +0.8 (0.8-1) 7.0 - 12.0 +0,5 (0.5-0.8) 15.0 - 19.0 +0.25 (0.25-0.5) 33.0 - 43.0 +0.1 (0.1 - 0.25) 34.0 - 17.0 -0.1 (<0.1) 8.0 - 4.0 Size Guide Number (SGN) 20 - 25 - Anhydrous Ammonia
Anhydrous Ammonia
82-0-0
Chemical Analysis
Component/Equivalent
Units
Minimum
Typical
Total Nitrogen wt. % N 82 - Ammonium wt. % NH3 99.5 99.5 - 99.8 Moisture wt. % H2O 0.2 0.2 - 0.5 Physical Parameters
Parameter
Range
Typical
Color - Colorless Specific Gravity @ 68°F/20°C, 7.3 atm. - 0.61 Boiling Point @ 1 atm., °F/°C - 28/-33 Freezing Point, °F/°C - 108/-78 Pounds per U.S. Gallon @ 68°F/20°C, 7.3 atm. - 5.04 Pounds per Unit N - 24.3 Vapor Pressure at Specific Temperatures
Temperature, °F/°C 30/-1.1 60/15.5 90/32.2 120/48.9 Vapor Pressure, psig 45 93 166 272 - N-P-K
- UAN 28
UAN 28
Urea Ammonium Nitrate Solution (28-0-0)
Chemical Analysis
Component/Equivalent
Units
Minimum
Typical
Total Nitrogen wt. % N 28 - Ammonium Form wt. % N - 7.0 Nitrate Form wt. % N - 7.0 Urea Form wt. % N - 14.0 Physical Analysis
Parameter
Typical
Color Clear Specific Gravity @ 60°F/15.5°C 1.29 Pounds per U.S. Gallon @ 60°F/15.5°C 10.7 Kilograms per Liter @ 60°F/15.5°C 1.288 Nitrogen, Pounds per U.S. Gallon 3.0 U.S. Gallons per Ton 186 Salt Out Temperature, °F/°C 14/-10
Petroleum Products
- JP54
- D2
- LNG
: aramomjian
: 86819829
As transportation, K Minerals are using the forwarding company 